Hour meter V2

This Twenty hour meter not only gives you all the information you need, but also has a built-in tachometer suitable for 2 and 4-stroke engines.

It consists of LCD screen; viewing angle direction at 6 o'clock,
•5-digit digital display, 5.8mm font height,
● LCD display temperature range: -30℃ -80℃

Instant RPM Model Information:

Three racing modes can be changed, 1P1R, 2P1R and 1P2R.
• Maximum speed 30000RPM,
● When spark is detected in the engine, the engine RPM will be displayed in real time.
● Total engine running time
● Total engine time since last inspection (resettable)
● Record of the maximum revolutions reached by the engine.

Model information Maintenance:

Records the total working time, range 0-99999H, cannot be deleted.
● Timing accuracy: 0.0-9999.9H, 0.1H; 10000-99999H, 1H,
3. Time reminder function
● CLEAN flashes every 5 hours to remind you to clean the air filter. Press and hold the button for 5 seconds to reset.
● OIL flashes every 10 hours to remind you to change the oil. Press and hold the button for 5 seconds to reset.
● VALVE flashes every 20 hours to remind timing maintenance and can be reset by pressing the button for 5 seconds.

A very simple installation and a CR2050 battery life, capacity: 360 mAh of up to 5 years working 8 hours a day ensure very good performance.

The hour meter is very easy to install: you just have to place the wire on the spark plug and secure it with clamps. Plus, it has a strong adhesive for sticking and has been pre-drilled for mounting with zip ties or wire.

Characteristics:
- Shows the total running time of the engine.
- Time since last review
- Engine revolutions
-Waterproof IP65
- Assembly in 2 minutes
- Compatible with ALL single cylinder 2 and 4 stroke engines.
- Size: 33 x 68mm
- Cable length 110 cm.